Here are some of the most important tips that will help you eliminate all types of car easily tooth.
Tip One: Car Wash
The first step should do is clean cars. However, be sure to use the soap dish detergent instead of using cars regular soap. The explanation could be the fact that the majority of car soap are left a little wax and silicon which makes it difficult dent. The concept is to remove all the wax whatever the manner in which to leverage your tools and equipment does not slip.
Tip Two: Get rid of all traces of grease and wax
Using a common stripper grease, wax and grease should be removed completely from the place. There are many degreasers you will be able to use. Otherwise, a little lemon juice and hot water can also help get rid of fat.
Tip three: Finding the right tools and equipment
Before you'll be able to repair the tooth could happen to gather the right tools. If both sides of the tooth can be achieved, then you should be able to use a hammer and dolly. If you are able to access one side and then use a nail welding gun, which can be purchased from most stores.
Tips four: better governance tooth removal car
Used for the first time in the last rule. This indicates that you have to start from Dent Repair first and then work your way to the past Dent. So, first you follow the same sequence in which they took your car scratches.
Five tip: Shrink
reduced mainly metal works shrink a little. You will be able to cut any metal by using a handful of ice cubes with a hammer shrinkage. In some cases, you got on the use of heat technology that develops the metal using a torch and narrowing quickly using the cream to remove small scratches. Remember, applying a blowtorch for periods of time than necessary could damage the paint and extended minerals.
Sixth tip: Stuffing
After straightening use a metal body burden. It should be applied to the load of the body in steel or metal directly, and then remove the old paint.
0 Comments